|
433MHz RF Wireless Control
Use your PC to control appliances around your home, or automate just
about anything, wireless! The receiver module has 8 independent control
outputs (easily expandable to 16 outputs if 8 is not enough) that you can
remotely turn ON or OFF using your PC. Operation at 433MHz ISM frequencies
assure
trouble free operation even on interference prone
microcontroller circuits. Transmitter plugs directly into
one PC serial port and is Visual Basic® friendly. Stand alone 8 input
transmitter board is also available as an option if PC control is not
desired.
Available downloads:
433MHz RF Wireless Control full feature article in pdf format.
Visual Basic test program
Specifications and Features |
From left to right :
Receiver Module,
PC serial transmitter,
Optional
stand alone transmitter.
|
Delivered Nationwide via LBC
|
|
Transmitter
Module:
Power Requirement:
Transmit Frequency:
Output Power:
Receiver
Module:
Power Requirement:
Control Distance:
Outputs:
Controller: |
PC serial version: None
Stand Alone: 8-12VDC
432 MHz typical
0dbm (1mW) at 50-ohm load
8-12VDC
100 ft typical
8 TTL outputs, expandable to 16
TTL outputs
z86E08 programmed for this
function |
05/30/2007
Last
Update |
